Creator design reference for Modular Server Rack — Tall Frame 12-Piece Pack; included printed parts are specified in the listing.Design reference photo

Creator photo; included parts are listed below. Accessories not included. The photo shows an assembled project; this listing includes only the specified printed components.

Electronics & racks / Parts for your next project

Modular Server Rack — Tall Frame 12-Piece Pack

3D printed in PETG for building a configured small rack frame.

$54.99 CAD

Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Secure checkout for Canadian shipping addresses. Choose your quantity on Stripe. Shipping to the U.S.? Contact us for a shipping quote before ordering. U.S. shipping is an additional charge.

Check fit before ordering ↓

A closer look

3D printed in PETG for building a configured small rack frame. Includes twelve printed frame members: four 240 mm-design upright members, four 180 mm-design front/rear crossmembers and four 111 mm-design side crossmembers; device trays and mounts excluded. Device trays, equipment mounts, fasteners, devices and installation are not included.

Check the fit

Start with these details so you can choose the right part for your setup.

  • Confirm your board, connector or rack dimensions and mounting-hole pattern before ordering.

What’s included

  • Twelve printed frame members: four 240 mm-design upright members, four 180 mm-design front/rear crossmembers and four 111 mm-design side crossmembers; device trays and mounts excluded.
  • Device trays, equipment mounts, fasteners, devices and installation are not included.

Start a small rack with a planned equipment layout

The tall frame pack provides the printed members for building a configured small rack. It is useful when you want several compatible devices to occupy a deliberate arrangement instead of spreading across a bench. Begin with the equipment list and the trays or mounts each device needs, then work outward to the frame. The twelve members form the framing portion of that plan; the device supports are separate decisions. A clear layout also helps identify where power leads and network cables will enter, turn and remain accessible for maintenance.

Understand the member sizes before estimating capacity

The pack uses four 240 mm-design upright members, four 180 mm-design front and rear crossmembers, and four 111 mm-design side crossmembers. These are member dimensions, not a guaranteed assembled rack height, width, depth or usable opening. Joint overlap and the matching mounting interfaces affect the finished arrangement. Compare the exact tray and device-mount system you intend to use, including its fixing locations. Do not assume that familiar rack terminology or the member lengths establish compatibility with standard commercial rack units.

Build the empty frame before adding devices

Sort members by function and establish their orientation and joint sequence on a level work surface. Select the separately required fasteners for the actual interfaces and assemble the frame without forcing misaligned holes. Check that the empty frame sits evenly and that the chosen trays or mounts can be fitted and removed. No equipment-load rating is supplied, so assess the intended use without treating the frame as a rated server cabinet. Plan device distribution and stability with the actual equipment, avoiding a layout where heavy cables pull the frame sideways.

Make servicing part of the rack arrangement

Leave room around each device for its connections and the airflow required by its supplier. Route cables so an individual tray or mount can be accessed without disturbing every other device, and use clear identification where several similar leads meet. Inspect printed joints and fasteners when equipment is changed or the rack is moved. Move the assembly using a method appropriate to the completed setup rather than lifting it by a single member or device cable. Regularly remove dust and check that new accessories have not blocked a ventilation path or altered the frame's balance.

Product questions

What does the listed price include?

Twelve printed frame members: four 240 mm-design upright members, four 180 mm-design front/rear crossmembers and four 111 mm-design side crossmembers; device trays and mounts excluded. Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Device trays, equipment mounts, fasteners, devices and installation are not included.

Will this match everything shown in the photo?

The creator photo is a design reference and may show other variants, quantities or accessories. The included-parts list describes exactly what this listing supplies.

Is the finished rack exactly 240 × 180 × 111 mm?

Those values describe the member designs. They are not stated assembled dimensions or usable clearances; the joints and matching mounting system determine the completed arrangement.

Can I install devices directly on the frame members?

Plan suitable compatible device trays or mounts for each item. This pack supplies frame members, and the intended equipment-support interfaces need to be chosen separately.

Will standard rack accessories fit?

Do not assume standard compatibility. Compare the actual fixing interface, opening and support geometry with the specific accessories you intend to install.

Original design: Concept by Luca — Modular Server Rack. MakerWorld model 836122. Original design

Your cart

Ordering within Canada? Buy each product through its secure checkout, or ask us about combining parts into one order.

Your cart is empty. Find a useful part and add it here.