Creator design reference for Screw-Lock Flexible Conduit Gland — 16 mm; included printed parts are specified in the listing.Design reference photo

Creator photo; included parts are listed below. Accessories not included.

Electronics & racks / Parts for your next project

Screw-Lock Flexible Conduit Gland — 16 mm

3D printed in PETG for retaining compatible flexible conduit at an enclosure opening.

$29.99 CAD

Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Secure checkout for Canadian shipping addresses. Choose your quantity on Stripe. Shipping to the U.S.? Contact us for a shipping quote before ordering. U.S. shipping is an additional charge.

Check fit before ordering ↓

A closer look

3D printed in PETG for retaining compatible flexible conduit at an enclosure opening. Includes one 16 mm gland comprising four printed components. Electronics, batteries, metal contacts, fasteners, accessories shown and installation are not included.

Check the fit

Start with these details so you can choose the right part for your setup.

  • Confirm your board, connector or rack dimensions and mounting-hole pattern before ordering.

What’s included

  • One 16 mm gland comprising four printed components.
  • Electronics, batteries, metal contacts, fasteners, accessories shown and installation are not included.

Plan a serviceable conduit entry

This 16 mm screw-lock gland provides four printed components for retaining a compatible flexible conduit at a project enclosure opening. Think about the entry position as part of the whole cable route. The conduit should approach comfortably, with room around the gland for assembly and later inspection. If several entries are close together, consider the space needed to grip and turn each component rather than arranging them only by their outer diameter. The screw-lock format is useful to assess when you want a defined mechanical retention arrangement. It remains one part of the project: the enclosure, wiring, conduit, and separately selected installation materials all contribute to how the finished route works.

Match the conduit and enclosure interface

Compare the actual 16 mm conduit profile with the gland, including corrugations and the section that will be held. Nominal conduit size is not enough to confirm every brand or shape. Check the gland's intended enclosure interface and compatible wall thickness before making a hole. The four listed bounding dimensions describe separate components, so they should not be treated as the assembled gland size, hole diameter, or usable cable passage. Account for how the components overlap and for access on both sides of the enclosure. A trial layout with the real conduit can reveal interference that is not obvious from measuring the empty box, especially near corners, boards, or other fittings.

Tighten for seating, then inspect the cable path

Lay out the four pieces in their intended assembly order and check that the printed interfaces engage naturally. Work with the project disconnected, and avoid using excessive force to overcome misalignment or a mismatched conduit profile. Verify that retaining the conduit does not pinch the cables passing through it. Give the route enough support that ordinary movement does not repeatedly pull against the gland. The PETG parts do not establish a certified strain-relief, weatherproof, or electrical enclosure rating. After installation, inspect the component seating and cable entry whenever the enclosure is moved or serviced. Keep the interface clear of grit that could affect reassembly, and replace damaged printed pieces instead of tightening harder to compensate for poor engagement.

Product questions

What does the listed price include?

One 16 mm gland comprising four printed components. Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Electronics, batteries, metal contacts, fasteners, accessories shown and installation are not included.

Will this match everything shown in the photo?

The creator photo is a design reference and may show other variants, quantities or accessories. The included-parts list describes exactly what this listing supplies.

Is this the same as the 16 mm to M16 × 1.5 connector?

This listing describes a four-component screw-lock gland. Do not assume it shares the other connector's enclosure interface or dimensions; compare the specific gland geometry with the opening and conduit you intend to use.

Can I determine the cutout from the largest component?

No. The largest bounding dimension includes external features and does not define the fitting diameter. Confirm the required enclosure opening and wall-thickness arrangement before drilling or cutting.

What should I inspect after moving the enclosure?

Check that the gland remains seated, the conduit is retained naturally, and the cables are not pinched or pulled tight. Inspect the printed interfaces if the conduit has been bent or tugged during the move.

Original design: jikulec — Screw Lock Flexible Pipe Gland. MakerWorld model 1949954. Original design

Your cart

Ordering within Canada? Buy each product through its secure checkout, or ask us about combining parts into one order.

Your cart is empty. Find a useful part and add it here.