Creator design reference for Round Cable Grommet — 60 mm Outer Flange; included printed parts are specified in the listing.Design reference photo

Creator photo; included parts are listed below. Accessories not included.

Home organization / Practical pieces for your home

Round Cable Grommet — 60 mm Outer Flange

3D printed in PETG for finishing a matching cable pass-through opening.

$27.99 CAD

Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Secure checkout for Canadian shipping addresses. Choose your quantity on Stripe. Shipping to the U.S.? Contact us for a shipping quote before ordering. U.S. shipping is an additional charge.

Check fit before ordering ↓

A closer look

3D printed in PETG for finishing a matching cable pass-through opening. Includes one printed round cable grommet with an approximately 60 mm outer flange. Hardware, devices, accessories shown and installation are not included.

Check the fit

Start with these details so you can choose the right part for your setup.

  • Compare the opening, cable, shelf or mounting area with the listed design and dimensions.

What’s included

  • One printed round cable grommet with an approximately 60 mm outer flange.
  • Hardware, devices, accessories shown and installation are not included.

Finish a cable opening around the real route

A round grommet helps give a compatible cable pass-through a deliberate edge and a clearer place for leads to enter or leave a surface. Think about the complete route before choosing the opening position. A desk cable hole should be reachable from both sides and should not land directly above a drawer, cross brace, or equipment shelf. For an existing opening, check the surface around it for enough flat area to support the flange. It is also useful to consider which plugs will need to pass through during later equipment changes. A tidy opening is much easier to live with when replacing a lead does not require dismantling the surrounding furniture.

Distinguish flange diameter from hole size

The approximately 60 mm dimension describes the outside flange. It does not mean that a 60 mm cutout is the correct installation hole. The component is listed at approximately 59.99 × 59.99 × 11.25 mm overall, but the fitting portion, available cable passage, and compatible surface thickness need separate confirmation. Measure an existing opening in more than one direction if it is rough or irregular, and note the thickness and edge condition of the material. For a new opening, confirm the actual insertion geometry before cutting. Keep enough solid material around the proposed hole for the flange to sit properly and check what is beneath the surface before doing any work.

Plan for cables to move without dragging

Trial-fit the PETG grommet into the matching opening without forcing it, then route cables with enough slack on both sides for normal movement. A device that is frequently lifted or unplugged should not drag its lead sharply across the pass-through edge. Avoid packing the opening so tightly that one cable can only be removed by pulling against all the others. Keep large connectors accessible during fitting and decide which ones must be passed through first. Wipe away dust around the flange and inspect the cable route when equipment changes. This product finishes an opening; a separate fixing or cable restraint may still be needed where a lead could otherwise pull on a device connection.

Product questions

What does the listed price include?

One printed round cable grommet with an approximately 60 mm outer flange. Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Hardware, devices, accessories shown and installation are not included.

Will this match everything shown in the photo?

The creator photo is a design reference and may show other variants, quantities or accessories. The included-parts list describes exactly what this listing supplies.

Should I use a 60 mm hole saw?

Confirm the required cutout first. The listing identifies an approximately 60 mm outer flange, which must overlap the surrounding surface; that measurement is not a verified installation-hole specification.

Will a large power plug pass through?

Compare the plug body with the actual clear passage, not just the outside flange. Also consider whether the connector can be fed through before the grommet is seated. Share plug measurements if clearance is uncertain.

Can it cover an uneven existing hole?

It may suit an opening only when the insertion portion fits and the flange has adequate support around it. Send the hole dimensions, surface thickness, and a photo of the edge to check the proposed fit.

Original design: piodeer — cable grommet configurator. MakerWorld model 1768800. Original design

Your cart

Ordering within Canada? Buy each product through its secure checkout, or ask us about combining parts into one order.

Your cart is empty. Find a useful part and add it here.