Design reference photoCreator photo; included parts are listed below. Accessories not included.
10-inch Rack Ear Pair — 201 × 40 mm Device Design
3D printed in PETG for mounting a compatible device in a selected rack.
Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Secure checkout for Canadian shipping addresses. Choose your quantity on Stripe. Shipping to the U.S.? Contact us for a shipping quote before ordering. U.S. shipping is an additional charge.
Check fit before ordering ↓A closer look
3D printed in PETG for mounting a compatible device in a selected rack. Includes one printed ear pair for a 201 mm-wide, 40 mm-high device in a 10-inch rack; check the mounting-hole pattern. Hardware, devices, accessories shown and installation are not included.
Check the fit
Start with these details so you can choose the right part for your setup.
- Confirm your board, connector or rack dimensions and mounting-hole pattern before ordering.
- The device design is 201 mm wide and 40 mm high; mounting-hole positions also need to match.
What’s included
- One printed ear pair for a 201 mm-wide, 40 mm-high device in a 10-inch rack; check the mounting-hole pattern.
- Hardware, devices, accessories shown and installation are not included.
Bring a suitable compact device into a rack layout
This ear pair is intended for a compatible device described by a 201 mm width and 40 mm height in a selected 10-inch rack arrangement. It can help make that device part of an organized equipment layout once the device and rack interfaces have been compared. Start by deciding where the front panel should sit and how frequently you need its ports or controls. A good layout keeps those everyday connections accessible while giving rear cables and any required separate support a planned place.
Check mounting geometry beyond the device outline
Matching the stated device width and height is only the first step. Measure the hole positions, the available thread or fastening arrangement on the device and any recess or projecting edge near the mounting area. Compare the rack's rail spacing and hole pattern as well. The approximate individual component bounds are not an assembled rack width or a guarantee that every 201 by 40 mm device shares the same mounting geometry. Photos of the device sides and the intended rack position are particularly helpful.
Allow room for connected cables and servicing
Measure the device with its cables plugged in, accounting for connector bodies and the bends specified for those cables. Leave access to any rear controls, power connection or ventilation openings described by the device manufacturer. Consider whether the device will need to be withdrawn for maintenance and where the leads will move during that process. Avoid arranging cable bundles so they pull sideways on the mounted device or place continual force on its connectors. A tidy front panel should remain practical to service from the other side.
Treat the mounting pair as part of the support plan
Assess the complete installation, including the rack, selected hardware and any support needed for the device. No load capacity is established by this listing. Compare both ear positions before tightening anything, and avoid using fasteners to pull a mismatched part into alignment. Support the device while establishing the final attachment and follow its mounting requirements. After installation, check that the ears remain seated correctly and the cables are not changing the device's position. Reassess the arrangement when substituting equipment or changing the rack layout.
Product questions
What does the listed price include?
One printed ear pair for a 201 mm-wide, 40 mm-high device in a 10-inch rack; check the mounting-hole pattern. Shipping within Canada is included in the listed price. Applicable taxes are calculated at checkout. Hardware, devices, accessories shown and installation are not included.
Will this match everything shown in the photo?
The creator photo is a design reference and may show other variants, quantities or accessories. The included-parts list describes exactly what this listing supplies.
Will any device measuring 201 by 40 mm fit?
No. The mounting holes, side profile, fastening method and rack interface must also match. The dimensions identify the intended device design, not universal compatibility.
Does the ear pair provide a weight rating?
No rated capacity is established. Assess the device's mounting requirements and the full rack support arrangement rather than using the presence of ears as evidence that additional support is unnecessary.
What measurements should I send for the rack side?
Provide the rail spacing, hole pattern and the intended mounting position, along with photos showing nearby equipment. Include any panel lip or obstruction that could affect alignment or access.
Original design: KellerLab — Fully Customizable Rackmount Ears. MakerWorld model 1259227. Original design