Tool Mount for Milwaukee M18 Grinder

A closer look

A grinder left across the bench can take up the space needed for the next job. This printed mount is intended to store a compatible Milwaukee M18 grinder using a backplate and two projecting cradle arms. It provides a dedicated return spot, making it easier to keep the tool in the same place among your workshop equipment. It is a storage accessory for a stationary tool, not a fixture for running the grinder or supporting a workpiece.

There are several M18 grinder shapes, so match the contact area rather than relying only on the platform name. Check the body profile where the tool will rest, the width between the support points, and room for the guard, handle, and any battery you intend to leave attached. Confirm your particular grinder model with us before ordering. The mount has no rated carrying load. A clear tool photo and model number help determine whether this mount is a sensible match before you plan the wall layout.

Useful for

• Organize a compatible grinder on a workshop wall or suitable mounting board.
• Create a dedicated return position near other stored power tools.
• Keep the bench area available for measuring, assembly, and layout work.

Check the fit

Start with these details so you can choose the right part for your setup.

• Provide the exact grinder model number and a photo of its body profile.
• Measure the intended support area and compare it with the cradle-arm spacing.
• Check clearance for the guard, side handle, disc, and intended stored battery configuration.
• Confirm the backplate hole arrangement and suitable fixings for the mounting surface.

What’s included

• Printed grinder storage mount.
• Grinder, battery, screws, anchors, and installation are not included.

Plan for the guard and side handle

The grinder body is only one part of the storage footprint. Its fitted guard, side handle, accessory and battery configuration determine how far it projects and how you can grasp it. Hold the complete stationary tool near the proposed location to check those clearances. Avoid a position where another tool must be moved before you can lift the grinder away. Leave the working accessory clear of shelving and stored items so the mount supports the intended housing area rather than relying on incidental contact elsewhere.

Compare how the housing meets both arms

A useful fit check looks at both cradle arms together. Photograph the tool from the side and beneath the intended resting area, then compare the contact positions with the mount shape. The housing should settle predictably without balancing on a small protrusion or forcing the arms apart. Different body contours can change the resting angle even when two grinders seem similar in overall size. Include your exact model and normal storage configuration when discussing fit so the comparison reflects the tool you will actually put on the wall.

Choose a practical workshop location

Choose a return spot that suits the workshop routine while keeping the stored grinder and printed mount clear of the active work area. A wall beside a bench may be convenient, but consider where grinding debris and sparks travel and follow the tool maker's storage guidance. Keep the retrieval route free of leads, clamps and loose accessories. Store consumables in a separate suitable location where selecting one does not involve reaching around the mounted tool or knocking it from its resting position.

Check the mount during workshop housekeeping

Put the grinder away only after use has ended and the tool is in the condition recommended for storage. Guide it onto the cradle rather than dropping it between the arms. Clean accumulated grit from the resting surfaces and inspect the mounting points and arm roots for movement or visible damage. If a different guard, handle position or battery changes the way the grinder sits, repeat the clearance check. A familiar storage habit should not replace checking that the tool is actually seated each time.

Product questions